Temperature controller, used for field with heating or with cooling

Model Number: 417-A01 RC-112E Key Specifications/Special Features: Product introduction:Product adopts the latest electronic technique with LED display, which learn from theadvantages and experience of stand-alone edition temperature controllers domesticallyand overseasMost economical product with simple operation, stable performance, small size and intelligent control, cool and heat shift functions, which applies to variousrefrigeration and heating places and equipmentsParameters:Temperature measure range: - 40 to 99°CResolution: 1°C

Accuracy: ±1°C

Power supply: 220V AC ±10%, 50/60Hz

Input: one NTC sensor

Output: one relay 10A/220V AC

Ambient requirements:

• Temperature: -10 to 60°C
• Humidity: 20 to 85% (no condensate)

Cut-out size: 71x29mm

Consumption: ≤3W

Relay 10A: resistive load maximum 1100W, inductive load maximum 275W and incandescent bulb maximum 220W

Function description:

• Temperature calibration
• When there is difference between the measuring temperature and the standard temperature, this function can keep the measuring temperature same as the standard temperature
• Temperature after calibration= temperature before calibration + adjusted value

Cool and heat function:

• In cool mode:
  • Cooling systems works in below situation:
  • Measuring temperature ≥ set temperature + Temperature differential
  • Cooling systems stop working in below situation:
  • Measuring temperature ≤ set temperature
• In heat mode:
  • Heating systems works in below situation:
  • Measuring temperature ≤ set temperature the temperature difference
  • Heating systems stop working in below situation:
  • Measuring temperature ≥ set temperature

Delay time:

• When power on for the first time, if the measuring temperature ≥ set temperature + temperature differential or measuring temperature ≤ set temperature difference, the output will not be activated immediately, and will be activated after delay time
• Time period between the previous stop and this starts is longer than the delay time

Installation notes:

• Output will be activated immediately, if it is shorter than the delay time, the output will be
• activated after the delay time
• Delay time is calculated from the previous output stop